KHD High-Pressure Ball Valve with Platform (160bar)

KHD Stainless Steel High-Pressure Ball Valve (DN12～50mm)

Features
• Mounting pad on top for easy installation of pneumatic/electric actuators
• Multiple sealing material combinations and wide media adaptability
• Compact size; handle with safety lock to prevent mis-operation
• Max.Working Pressure:160bar

Product Details
概要描述
文档下载

Commodity name: KHD High-Pressure Ball Valve with Platform (160bar)
Commodity ID: EG00400
小标题: KHD Stainless Steel High-Pressure Ball Valve (DN12～50mm)

○ 160bar, -40℃～+200℃ ○ BSPP: G1/4～G2; Weld: 14～60mm ○ Stainless steel, wide media range, provides a mounting pad on top for actuator installation

Ordering Information

Sealant Material Application Chart

Type	Material	Uses
Ball Seat Sealing Material	POM	Primarily used for neutral liquids and gases such as water, oil, air, and nitrogen; temperature resistance: -35°C to +100°C; pressure rating: 160 bar.
Ball Seat Sealing Material	PEEK	High temperature resistance and excellent corrosion resistance; good resistance to most acids, bases, and solvents. Temperature range: -40°C to +250°C; pressure rating: 160 bar.
Stem/Joint Sealing Material	NBR	Suitable for non-corrosive media such as oil, water, and air; exhibits excellent compatibility with high-pressure gases; temperature resistance: -35°C to +100°C.
	FPM	Resistant to acids, alkalis, and benzene-based solvents; suitable for most media; not resistant to ammonia; temperature range: -25°C to +200°C.
	EPDM	Suitable for ammonia, steam, alcohols, ketones, and aldehydes; not resistant to mineral oils; temperature resistance: -40°C to +130°C.

Common Material Combinations

Material Combination Code	Model	Valve body	Ball Seat Seal	Valve Stem Seal	Uses
4423	KHD-20-G3/4-4423	304	POM	NBR	Neutral liquids and gases such as water, oil, air, and nitrogen, from −35°C to +100°C.
4465	KHD-20-G3/4-4465	304	PEEK	FPM	Suitable for high temperatures, benzene‑based environments, alkalis at ambient temperature, and weakly acidic media with a pH ≥ 5.0; operating range: −25°C to +200°C.
4466	KHD-20-G3/4-4476	304	PEEK	EPDM	Suitable for low temperatures, ammonia, alcohols, and ketones; not resistant to mineral oils; operating temperature range: -40°C to +130°C.

I) Stainless Steel Female Threaded Ball Valve

Table of Technical Data [mm]

Model	DN	Ball Orifice	A	C	L	H	H1	W	E1	E2	V1	V2	SW	Torque (water) [Nm]
KHD-15-G1/2-4423	15	15	G1/2	15.0	70	37.0	67.0	135	36	42	6	6	9	≤19
KHD-20-G3/4-4423	20	18	G3/4	16.5	76	43.0	72.0	135	36	42	6	6	9	≤32
KHD-25-G1-4423	25	23	G1	18.5	88	54.0	86.0	155	42	50	6	7	11	≤42
KHD-32-G11/4-4423	32	30	G11/4	20.5	102	57.5	89.5	155	42	50	6	7	11	≤75
KHD-40-G11/2-4423	40	36	G11/2	22.5	114	67.5	106.5	195	50	70	7	9	14	≤115
KHD-50-G2-4423	50	47	G2	25.0	146	87.0	152.0	267	70	102	9	11	17	≤160

II) Weld End Ball Valve
(face seal weld nipples for easy installation and removal)
Rubber Seals: FPM (standard), EPDM (optional)

Table of Technical Data [mm]

Model	DN	Ball Orifice	OD	S	L	H	H1	W	E1	E2	V1	V2	SW	SW1	Torque (water) [Nm]
P-KHD-12-14F*1.5-4423	12	15	14	1.5	136	37.0	67.0	135	36	42	6	6	9	22	≤19
P-KHD-15-18F*2.0-4423	15	15	18	2.0	144	37.0	67.0	135	36	42	6	6	9	27	≤19
P-KHD-15-22F*2.0-4423	15	15	22	2.0	150	37.0	67.0	135	36	42	6	6	9	32	≤19
P-KHD-20-28F*2.5-4423	20	18	28	2.5	163	43.0	72.0	135	36	42	6	6	9	38	≤32
P-KHD-25-34F*3.0-4423	25	23	34	3.0	188	54.0	86.0	155	42	50	6	7	11	46	≤42
P-KHD-32-42F*3.5-4423	32	30	42	3.5	212	57.5	89.5	155	42	50	6	7	11	55	≤75
P-KHD-40-48F*4.0-4423	40	36	48	4.0	234	67.5	106.5	195	50	70	7	9	14	60	≤115
P-KHD-50-60F*5.0-4423	50	47	60	5.0	290	87.0	152.0	267	70	102	9	11	17	75	≤160

Features
• Mounting pad on top for easy installation of pneumatic/electric actuators
• Multiple sealing material combinations and wide media adaptability
• Compact size; handle with safety lock to prevent mis-operation
• Max.Working Pressure:160bar

Ordering Information

Sealant Material Application Chart

Type	Material	Uses
Ball Seat Sealing Material	POM	Primarily used for neutral liquids and gases such as water, oil, air, and nitrogen; temperature resistance: -35°C to +100°C; pressure rating: 160 bar.
Ball Seat Sealing Material	PEEK	High temperature resistance and excellent corrosion resistance; good resistance to most acids, bases, and solvents. Temperature range: -40°C to +250°C; pressure rating: 160 bar.
Stem/Joint Sealing Material	NBR	Suitable for non-corrosive media such as oil, water, and air; exhibits excellent compatibility with high-pressure gases; temperature resistance: -35°C to +100°C.
	FPM	Resistant to acids, alkalis, and benzene-based solvents; suitable for most media; not resistant to ammonia; temperature range: -25°C to +200°C.
	EPDM	Suitable for ammonia, steam, alcohols, ketones, and aldehydes; not resistant to mineral oils; temperature resistance: -40°C to +130°C.

Common Material Combinations

Material Combination Code	Model	Valve body	Ball Seat Seal	Valve Stem Seal	Uses
4423	KHD-20-G3/4-4423	304	POM	NBR	Neutral liquids and gases such as water, oil, air, and nitrogen, from −35°C to +100°C.
4465	KHD-20-G3/4-4465	304	PEEK	FPM	Suitable for high temperatures, benzene‑based environments, alkalis at ambient temperature, and weakly acidic media with a pH ≥ 5.0; operating range: −25°C to +200°C.
4466	KHD-20-G3/4-4476	304	PEEK	EPDM	Suitable for low temperatures, ammonia, alcohols, and ketones; not resistant to mineral oils; operating temperature range: -40°C to +130°C.

I) Stainless Steel Female Threaded Ball Valve

Table of Technical Data [mm]

Model	DN	Ball Orifice	A	C	L	H	H1	W	E1	E2	V1	V2	SW	Torque (water) [Nm]
KHD-15-G1/2-4423	15	15	G1/2	15.0	70	37.0	67.0	135	36	42	6	6	9	≤19
KHD-20-G3/4-4423	20	18	G3/4	16.5	76	43.0	72.0	135	36	42	6	6	9	≤32
KHD-25-G1-4423	25	23	G1	18.5	88	54.0	86.0	155	42	50	6	7	11	≤42
KHD-32-G11/4-4423	32	30	G11/4	20.5	102	57.5	89.5	155	42	50	6	7	11	≤75
KHD-40-G11/2-4423	40	36	G11/2	22.5	114	67.5	106.5	195	50	70	7	9	14	≤115
KHD-50-G2-4423	50	47	G2	25.0	146	87.0	152.0	267	70	102	9	11	17	≤160

II) Weld End Ball Valve
(face seal weld nipples for easy installation and removal)
Rubber Seals: FPM (standard), EPDM (optional)

Table of Technical Data [mm]

Model	DN	Ball Orifice	OD	S	L	H	H1	W	E1	E2	V1	V2	SW	SW1	Torque (water) [Nm]
P-KHD-12-14F*1.5-4423	12	15	14	1.5	136	37.0	67.0	135	36	42	6	6	9	22	≤19
P-KHD-15-18F*2.0-4423	15	15	18	2.0	144	37.0	67.0	135	36	42	6	6	9	27	≤19
P-KHD-15-22F*2.0-4423	15	15	22	2.0	150	37.0	67.0	135	36	42	6	6	9	32	≤19
P-KHD-20-28F*2.5-4423	20	18	28	2.5	163	43.0	72.0	135	36	42	6	6	9	38	≤32
P-KHD-25-34F*3.0-4423	25	23	34	3.0	188	54.0	86.0	155	42	50	6	7	11	46	≤42
P-KHD-32-42F*3.5-4423	32	30	42	3.5	212	57.5	89.5	155	42	50	6	7	11	55	≤75
P-KHD-40-48F*4.0-4423	40	36	48	4.0	234	67.5	106.5	195	50	70	7	9	14	60	≤115
P-KHD-50-60F*5.0-4423	50	47	60	5.0	290	87.0	152.0	267	70	102	9	11	17	75	≤160