+86 0573-83699017

egfluid@eaglefluid.com



中文

ENGLISH

产品中心

PRODUCTS CENTER

Home page

Pneumatic/Electric/Solenoid Valve

All

All
Product Management

EVL Compact Pneumatic Valve (25bar)

○ Pressure: 25bar, -45℃～+180℃ ○ G3/8～1″, Stainless Steel ○ For liquids and gases, actuator and valve body combined into one housing, space saving, normally closed

EVH/EVB High-Pressure Pneumatic Valve (210bar)

○ 210bar, -30℃～+80℃ ○ G1/4～1/2″, Stainless Steel ○ For liquids, actuator and valve body combined into one housing, space saving, normally closed

ZQ Economical Pneumatic Valve (-25℃～+140℃/60bar)

○ Pressure: 60bar, -25℃～+140℃ ○ Interface: G1/2～11/4″, Stainless Steel ○ For liquids and gases, compact design, normally close or normally closed, cost-effective

NQ/NQH Small Pneumatic Needle Valve (Max.400bar/-35℃~+180℃)

○ 400bar, -35℃～+180℃ ○ BSPP: G1/8～G3/8, Ferrule: 6～10mm ○ 316L stainless steel, good corrosion resistance, compact design, normally closed or normally open

MKH Compact High-Pressure Electric Valve (160bar)

○ 160bar, -25℃～+80℃ ○ Voltage: 24VDC, Actuation time: 9s~13s ○ Weld: 22～60mm ○ Compact structure, easy installation；Low power

MB Small Direct-Acting Solenoid Valve (0–30 bar)

○ 0～30bar, DN2～4mm ○ 24VDC, normally closed/normally open ○ Stainless steel, small size, long life, explosion-proof (optional)

MB Ferrule Solenoid Valve (0~30bar/corrosion resistance)

○ 0～30bar, OD6～8mm ○ 24VDC, normally closed/normally open ○ Stainless steel, directly connected to steel tubing by ferrule, explosion-proof (optional)

MF Bi-Directional Direct-Acting Solenoid Valve (0～25bar)

○ 0～25bar, G3/8～G1/2 ○ 24VDC, normally closed ○ Stainless steel, effective shut-off with both directional flows, for media with very high viscosity, anti-clogging

MA Corrosion-Resistant Bi-Directional Direct-Acting Solenoid Valve (0～16bar)

○ 0～16bar, G1/4～G3/8 ○ 316L stainless steel, FPM/EPDM seal;Normally closed ○ Isolates medium from electromagnetic actuator, suitable for seawater, acids, and alkalis, bi-directional shutoff

MR Sub-Step Direct Acting Solenoid Valve (0～16bar)

○ 0～16bar, G1/2～G11/4 ○ 24VDC, normally closed/normally open ○ Wide pressure range, close and open with zero differential pressure, stainless steel, for liquids and gases

P-MR Welded Solenoid Valve (0～16bar)

○ 0～16bar; Weld: 18～34mm ○ 24VDC, normally closed/normally open ○ Stainless steel, wide pressure range, close and open with zero differential pressure, direct connection to steel tubes

RSP Low-Pressure Solenoid Valve (0.3～16bar)

○ Pressure: 0.3～16bar, G3/8～G2″ ○ 24VDC, normally closed/normally open ○ Stainless steel, for liquids and gases with pressure over 0.3bar

MT High-Temperature Solenoid Valve (180℃/0～16bar)

○ 0～16bar, G1/2～G11/4 ○ Medium Temperature: +180℃;Ambient temperature: ＋50℃ ○ Zero differential pressure, good sealing performance under high temperature

ML Small High Pressure Solenoid Valve (1~120bar)

○ 1～120bar, G1/4～G3/8 ○ 24VDC, normally closed ○ Female thread or ferrule connection, stainless steel, for gases and low-viscosity liquids (filtration to ≤60μm)

MC High-Pressure Direct-Acting Solenoid Valve (0～120bar)