FRKC Large-Bore High Temp.& Pressure Ball Valve(+230℃/Max.300bar)
FRKC Stainless Steel High-Pressure Ball Valve for Extreme Environments (DN50~65mm)
Uses
1) High-temperature supercritical CO2
2) Applications with high temperature and pressure / low temperature and high-pressure gases or liquids
3) Conditions where rubber is not allowed
Features
• Valve connection features Ring Joint (RJ) flange PN160, PN320 (GB/T 9124.1-2019)
• The stem is designed with elastic compensation, ensuring a long life
• Adopting both metallic seal and elastomeric seal at the joints, providing a broad temperature range
• No-rubber sealing allows for applications with high-pressure gases
• Mounting holes at the top allows for the installation of an electric or pneumatic actuator
- Product Details
- 概要描述
- 文档下载
-
- Commodity name: FRKC Large-Bore High Temp.& Pressure Ball Valve(+230℃/Max.300bar)
- Commodity ID: EG00530
- 小标题: FRKC Stainless Steel High-Pressure Ball Valve for Extreme Environments (DN50~65mm)
<span style="color:#f2962b"> ○ </span> 300bar, -50℃～+230℃ <span style="color:#f2962b"> ○ </span> DN50～65mm, RJ Flange <span style="color:#f2962b"> ○ </span> Stainless steel, used for high temperature supercritical CO2 and high temperature & pressure gases, compatible with actuators
Technical Data
• Working temperature: -50℃~+230℃
• Max. working pressure: See "Table of Technical Data"
• Body material: 304 stainless steel
• Stem packing seal: Carbon Fiber Reinforced PTFE
• Ball seat seal: PEEK
Application of Sealing Materials
Pressure Rating-Temperature Table
I) Manual High-Temperature High-Pressure Ball Valve
Ordering Information
Table of Technical Data [mm]II) High Temperature & Pressure Ball Valve with Butt Weld Flange (DN50~65mm)
Technical Data
• Flange type: Ring Joint (RJ) Flange PN160, PN320 (GB/T 9124.1-2019)
• Flange material: 304 stainless steel
• Bolt and nut material: A2-70 stainless steel
Table of Technical Data [mm]
III) Pneumatic High Temperature & Pressure Ball Valve (DN50~65mm)Product Overview
FRKC pneumatic ball valves are driven by pneumatic actuators. High-pressure ball valves typically use a DR-series double-acting pneumatic actuator for valve switching, equipped with a 4M-series solenoid valve to control the actuator's air supply. TCR series valve position monitors are mounted on the top of the actuators, converting the valve's on-off positions into on-off electrical signals.
Technical Data
• For detailed information on DR pneumatic actuators, please refer to the DR/SY pneumatic actuator product page.
• For detailed information on the 4M solenoid valve and the TCR valve position indicator, please refer to the product page for TCR3MVAZ/4M310 pneumatic actuator accessories.
• Actuator operating pressure: 5~8bar
• Switching time: 2~3s
• 4M solenoid valve voltage: 24VDC
• 4M solenoid valve connection thread: BSPT 1/4
• TCR valve position monitor contact configuration:
1 NO contact &1 NC contact at each position
• Max. load of contact: 3 A, 250 VAC
Table of Technical Data [mm] -
Uses
1) High-temperature supercritical CO2
2) Applications with high temperature and pressure / low temperature and high-pressure gases or liquids
3) Conditions where rubber is not allowedFeatures
• Valve connection features Ring Joint (RJ) flange PN160, PN320 (GB/T 9124.1-2019)
• The stem is designed with elastic compensation, ensuring a long life
• Adopting both metallic seal and elastomeric seal at the joints, providing a broad temperature range
• No-rubber sealing allows for applications with high-pressure gases
• Mounting holes at the top allows for the installation of an electric or pneumatic actuator
Technical Data
• Working temperature: -50℃~+230℃
• Max. working pressure: See "Table of Technical Data"
• Body material: 304 stainless steel
• Stem packing seal: Carbon Fiber Reinforced PTFE
• Ball seat seal: PEEK
Application of Sealing Materials
Pressure Rating-Temperature Table
I) Manual High-Temperature High-Pressure Ball Valve
Ordering Information
Table of Technical Data [mm]
II) High Temperature & Pressure Ball Valve with Butt Weld Flange (DN50~65mm)
Technical Data
• Flange type: Ring Joint (RJ) Flange PN160, PN320 (GB/T 9124.1-2019)
• Flange material: 304 stainless steel
• Bolt and nut material: A2-70 stainless steel
Table of Technical Data [mm]
III) Pneumatic High Temperature & Pressure Ball Valve (DN50~65mm)
Product Overview
FRKC pneumatic ball valves are driven by pneumatic actuators. High-pressure ball valves typically use a DR-series double-acting pneumatic actuator for valve switching, equipped with a 4M-series solenoid valve to control the actuator's air supply. TCR series valve position monitors are mounted on the top of the actuators, converting the valve's on-off positions into on-off electrical signals.
Technical Data
• For detailed information on DR pneumatic actuators, please refer to the DR/SY pneumatic actuator product page.
• For detailed information on the 4M solenoid valve and the TCR valve position indicator, please refer to the product page for TCR3MVAZ/4M310 pneumatic actuator accessories.
• Actuator operating pressure: 5~8bar
• Switching time: 2~3s
• 4M solenoid valve voltage: 24VDC
• 4M solenoid valve connection thread: BSPT 1/4
• TCR valve position monitor contact configuration:
1 NO contact &1 NC contact at each position
• Max. load of contact: 3 A, 250 VAC
Table of Technical Data [mm]
3D Diagrams and Sample Downloads
Welcome to leave a comment!
Contact Information
Telephone: +86 0573-83699017
Sales email: Nancy@eaglefluid.com
Export email: export@eaglefluid.com
Mobile Phone: +86 19384097057
WhatsApp: +86 19564931127
Address: No. 468, Shengtang Road, Jiaxing City, Zhejiang Province, China
Postal code: 314000