产品中心


PRODUCTS CENTER
MA 316L Stainless Steel Corrosion-Resistant Solenoid Valve
+
  • MA 316L Stainless Steel Corrosion-Resistant Solenoid Valve

MA 316L Stainless Steel Corrosion-Resistant Solenoid Valve

Isolated wetted path, bidirectional shut-off and 24 VDC normally closed operation

The MA corrosion-resistant solenoid valve separates the process medium from the electromagnetic actuator. The medium contacts 316L stainless steel and the selected elastomer seal, making material compatibility the key selection step.

MA is a bidirectional, direct-acting solenoid valve with normally closed 24 VDC operation. Compare the G1/4 MA04 and G3/8 MA08 configurations below; their maximum working pressures are different.

Features      
● As the structure of MA fully isolates the medium from the electromagnetic actuator, the medium only contacts 316L stainless steel valve body and rubber seal. Therefore, MA has high corrosion resistance, applicable to seawater, acids, and alkalis. 
● MA features bi-directional shutoff and high pressure rating

Technical Data 
● Body material: 316L stainless steel (wetted parts 
● Packing material: FPM or EPDM (see "Application of Sealing Materials" ) 
● Pressure range: see "Table of Technical Data 
● Ambient temperature: -15℃~+50℃ 
● Supply voltage: 24 VDC (Max. deviation ±10%) 
● Electrical connection: DIN 43650 junction box 
● Protection class:IP65 
● Switching type: normally closed NC (closed with power off & open with power on) 
● Installation requirement: horizontal installation with the coil facing upwards 
● Medium temperature: -15℃~+80℃ (recommend selecting energy-saving coils if media temperature≥70℃)                 

  • Product Details
  • 概要描述
  • 文档下载
    • Commodity name: MA 316L Stainless Steel Corrosion-Resistant Solenoid Valve
    • Commodity ID: EG00940
    • 小标题: Isolated wetted path, bidirectional shut-off and 24 VDC normally closed operation

    MA corrosion-resistant solenoid valves isolate the medium from the electromagnetic actuator. The wetted path contacts 316L stainless steel and the selected FPM or EPDM seal. Normally closed 24 VDC models provide bidirectional shut-off. Choose MA04 with G1/4 connection for 0-12 bar or MA08 with G3/8 connection for 0-16 bar, subject to media and operating-condition checks.

    Application of Sealing Materials

    Material Code

    Material

    Application

    F

    FPM

    For most acids, bases, and sea water,benzene; incompatible with ammonia, -15℃~+80℃

    E

    EPDM

    Suitable for ammonia, steam, alcohols, ketones; not resistant to mineral oil; Temperature: -15℃~+80℃

     

    Ordering Information

     

    Outline Diagram of Female Connection

     


    Table of Technical Data [mm]

    Valve Model

    DN 

    Port A

    H

    B

    L

    F

    E

    C

    Power

    Pressure 
    [bar]

    Standard

    Energy-Saving

    MA04-G1/4-24VDC-F-SL

    04

    G1/4

    81

    25

    58

    25

    15

    54

    26W

    4W

    0–12

    MA08-G3/8-24VDC-F-SL

    08

    G3/8

    99

    38

    76

    32

    24

    55

    32W

    5W

    0–16

    Choosing an MA 316L stainless steel solenoid valve

    Choose the correct port size and pressure rating

    • MA04-G1/4: 4 mm nominal bore, G1/4 female port and working pressure 0-12 bar.
    • MA08-G3/8: 8 mm nominal bore, G3/8 female port and working pressure 0-16 bar.

    The series maximum of 16 bar applies to the MA08 configuration. Check the complete model and operating conditions when selecting an MA04. A nominal connection size is not a flow-capacity guarantee; include the required flow and allowable pressure drop in your enquiry.

    Check the process medium against both wetted materials

    Isolation prevents the process medium from contacting the electromagnetic actuator. It does not remove the need to check compatibility with the 316L body and seal. For seawater, acidic or alkaline media, provide the actual composition, concentration, temperature and exposure conditions for review.

    FPM and EPDM options cover different applications. The catalogue identifies FPM as incompatible with ammonia and EPDM as unsuitable for mineral oil. Do not select a seal only from a broad description such as "chemical service." The listed medium-temperature range is -15 to +80 C; ambient temperature is -15 to +50 C.

    Confirm the power-off state and electrical installation

    The standard MA is normally closed: power off closes the valve and power on opens it. Bidirectional shut-off refers to the permitted flow direction; it does not mean that the valve switches between three ports or provides two independently controlled outlets.

    The listed supply is 24 VDC with a tolerance of +/-10%, using a DIN 43650 junction box. The catalogue specifies IP65 protection and horizontal installation with the coil facing upwards. Standard and energy-saving coil options have different power consumption. An energy-saving coil is recommended when medium temperature is 70 C or higher.

    MA selection questions

    Is every stainless steel solenoid valve suitable for corrosive media?

    No. Suitability depends on all wetted materials and the actual process conditions. The MA design isolates the actuator, but the 316L body and selected seal still require a compatibility check.

    What should I send for an MA quotation?

    Send the fluid and concentration, temperature, normal and maximum pressure in each direction, required flow, port size, supply voltage and expected switching frequency. Specify whether a low-power coil is required.

    Request MA model and seal selection support. If you need a valve for high-temperature service, compare the operating conditions with the MT high-temperature solenoid valve rather than assuming the models are interchangeable.

    Key words:
    • Solenoid valve
    • medium
    • valve body
    • 316L
    • applicable
    • sealing material
    • not resistant to
    • isolation
    • fluororubber
    • material
  • The MA corrosion-resistant solenoid valve separates the process medium from the electromagnetic actuator. The medium contacts 316L stainless steel and the selected elastomer seal, making material compatibility the key selection step.

    MA is a bidirectional, direct-acting solenoid valve with normally closed 24 VDC operation. Compare the G1/4 MA04 and G3/8 MA08 configurations below; their maximum working pressures are different.

    Features      
    ● As the structure of MA fully isolates the medium from the electromagnetic actuator, the medium only contacts 316L stainless steel valve body and rubber seal. Therefore, MA has high corrosion resistance, applicable to seawater, acids, and alkalis. 
    ● MA features bi-directional shutoff and high pressure rating

    Technical Data 
    ● Body material: 316L stainless steel (wetted parts 
    ● Packing material: FPM or EPDM (see "Application of Sealing Materials" ) 
    ● Pressure range: see "Table of Technical Data 
    ● Ambient temperature: -15℃~+50℃ 
    ● Supply voltage: 24 VDC (Max. deviation ±10%) 
    ● Electrical connection: DIN 43650 junction box 
    ● Protection class:IP65 
    ● Switching type: normally closed NC (closed with power off & open with power on) 
    ● Installation requirement: horizontal installation with the coil facing upwards 
    ● Medium temperature: -15℃~+80℃ (recommend selecting energy-saving coils if media temperature≥70℃)                 

Application of Sealing Materials

Material Code

Material

Application

F

FPM

For most acids, bases, and sea water,benzene; incompatible with ammonia, -15℃~+80℃

E

EPDM

Suitable for ammonia, steam, alcohols, ketones; not resistant to mineral oil; Temperature: -15℃~+80℃

 

Ordering Information

 

Outline Diagram of Female Connection

 


Table of Technical Data [mm]

Valve Model

DN 

Port A

H

B

L

F

E

C

Power

Pressure 
[bar]

Standard

Energy-Saving

MA04-G1/4-24VDC-F-SL

04

G1/4

81

25

58

25

15

54

26W

4W

0–12

MA08-G3/8-24VDC-F-SL

08

G3/8

99

38

76

32

24

55

32W

5W

0–16

Choosing an MA 316L stainless steel solenoid valve

Choose the correct port size and pressure rating

  • MA04-G1/4: 4 mm nominal bore, G1/4 female port and working pressure 0-12 bar.
  • MA08-G3/8: 8 mm nominal bore, G3/8 female port and working pressure 0-16 bar.

The series maximum of 16 bar applies to the MA08 configuration. Check the complete model and operating conditions when selecting an MA04. A nominal connection size is not a flow-capacity guarantee; include the required flow and allowable pressure drop in your enquiry.

Check the process medium against both wetted materials

Isolation prevents the process medium from contacting the electromagnetic actuator. It does not remove the need to check compatibility with the 316L body and seal. For seawater, acidic or alkaline media, provide the actual composition, concentration, temperature and exposure conditions for review.

FPM and EPDM options cover different applications. The catalogue identifies FPM as incompatible with ammonia and EPDM as unsuitable for mineral oil. Do not select a seal only from a broad description such as "chemical service." The listed medium-temperature range is -15 to +80 C; ambient temperature is -15 to +50 C.

Confirm the power-off state and electrical installation

The standard MA is normally closed: power off closes the valve and power on opens it. Bidirectional shut-off refers to the permitted flow direction; it does not mean that the valve switches between three ports or provides two independently controlled outlets.

The listed supply is 24 VDC with a tolerance of +/-10%, using a DIN 43650 junction box. The catalogue specifies IP65 protection and horizontal installation with the coil facing upwards. Standard and energy-saving coil options have different power consumption. An energy-saving coil is recommended when medium temperature is 70 C or higher.

MA selection questions

Is every stainless steel solenoid valve suitable for corrosive media?

No. Suitability depends on all wetted materials and the actual process conditions. The MA design isolates the actuator, but the 316L body and selected seal still require a compatibility check.

What should I send for an MA quotation?

Send the fluid and concentration, temperature, normal and maximum pressure in each direction, required flow, port size, supply voltage and expected switching frequency. Specify whether a low-power coil is required.

Request MA model and seal selection support. If you need a valve for high-temperature service, compare the operating conditions with the MT high-temperature solenoid valve rather than assuming the models are interchangeable.

3D Diagrams and Sample Downloads