Product Center


Weld End Solenoid Valve

  • Max. Working Pressure: 0.8~40bar

  • DN:15~50mm

  • Working Temperature: -10℃~+50℃

  • Body Material:Stainless steel

Product details:

P-MJ Weld End Stainless Steel Solenoid Valve (DN15~50 mm)

 

Features: the valve has a high pressure and the pilot hole has a filter screen for obstruction prevention.

 

Applicable media:water, air, steam, oils and other non-corrosive neutral gases and liquids

 

Technical Data
● Temperature of medium: -5℃~+80℃
● Ambient temperature: -10℃~+50℃
● Min. operating differential pressure: 0.8 bar
● Body material: 304/CF8 stainless steel and magnetic stainless steel
● Weld nipple/nut material: 304 stainless steel or 20#/45# carbon steel
● Type of connection: removable weld end, flat rubber seal
● Direction of flow: unidirectional flow
● Viscosity of medium: ≤20 cst
● Electrical connection: DIN 43650 junction box
● Rated voltage: 24 VDC, 220 VAC (optional); tolerance: ±10%
● Protection class: IP65 (22 W, 26 W)

 

Table of Technical Data [mm]

 

Code Material Uses
N NBR Intended for oils, water, air and other non-corrosive media
F FPM (optional)  Good corrosion resistance; applicable to most media; intolerant of ammonia, alcohols and diethyl ether
E EPDM (optional)  Intended for ammonia, acetic acid, methanol, steam and ethylene glycol; mineral oil intolerant

 

Ordering Information

 

  

Parameters Table:

Table of Technical Data [mm]

Ordering Number DN D S A B C F E L Power W Working Pressure [bar]
P-MJ15-18F-24VDC-N-SS 15 18 1.5 70 36.5 40 94 113 154 22 0.8~40
P-MJ20-22F-24VDC-N-SS 20 22 1.5 90 48.5 54 105 131 176 22 0.8~40
P-MJ25-28F-24VDC-N-SS 25 28 2 100 56.5 63 109 139 192 22 0.8~40
P-MJ32-35F-24VDC-N-SS 32 35 2 120 66 76 134 169 226 26 0.8~40
P-MJ40-42F-24VDC-N-SS 40 42 2.5 128 76 91 147 185 250 26 0.8~40
P-MJ40-48F-24VDC-N-SS 40 48 3 130 76 91 147 185 250 26 0.8~40
P-MJ50-60F-24VDC-N-SS 50 60 3.5 144 86 98 181 224 292 32 0.8~40

Download:

Key words:

Previous: No

Next: No

Leave us a message

Related Products