依格流体技术（浙江）股份有限公司 EAGLE FLUID TECHNOLOGY (ZHEJIANG) CO., LTD

Uses 
US-FL/01-MAN ferrule pre-installation machine can be used for the pre-installation of not only SR, ER, EG and other ferrules of EAGLE, but also EO, EO2 and other ISO8434-1 compliant ferrules of Parker.
 

Features 
US-FL/01-MAN realizes ferrule pre-installation with a manual hydraulic pump. US-FL/01-MAN features simple structural design and high reliability. The use of US-FL/01-MAN can ensure reliable connection of bite type fittings, reduce human errors and labor intensity and improve the efficiency of batch installation, and in particular it is valuable to the installation of large high pressure ferrules with a size exceeding Φ22. US-FL/01-MAN is applicable to steel tubes of various materials and wall thicknesses, such as carbon steel and stainless steel.

Technical Data
● Mode of operation: manual
● Overall dimensions: 400 mm*350 mm*200 mm
● Weight: 38 kg
● Steel tube material: carbon steel and stainless steel
● Steel tube OD: ø6~42 mm

How to Use
1. Check the dimensions of the VS pre-install connector.
2. Mount the ferrule pre-install tooling (including pre-install baffle and connector).
3. Select the pressure based on steel tube material (carbon steel or stainless steel) and tube size by referring to the recommended pressure value or the empirical value.
4. Lubricate the nut and ferrule and mount them on the steel tube in turn.
5. Insert the tube with nut and ferrule into the pre-installation machine and press the tube against the connector.
6. Move the handle up and down until the pressure gauge points at the selected pressure.
7. Release the unload button and remove the ferrule pre-installed tube.

Pre-install Tooling
1. Pre-install Baffle

	Ordering Number	Series	Steel Tube OD	Ordering Number	Series	Steel Tube OD
	GP06	L/S	6	GP20	S	20
	GP08	L/S	8	GP22	L	22
	GP10	L/S	10	GP25	S	25
	GP12	L/S	12	GP28	L	28
	GP14	S	14	GP30	S	30
	GP15	L	15	GP35	L	35
	GP16	S	16	GP38	S	38
	GP18	L	18	GP42	L	42

2. Pre-install Connector

	Ordering Number	Steel Tube OD	d	D+0.2+0	Ordering Number	Steel Tube OD	d	D+0.2+0
	VS06L	6	6+0.21+0.14	8.1	VS06S	6	6+0.21+0.14	8.1
	VS08L	8	8+0.24+0.15	10.1	VS08S	8	8+0.24+0.15	10.1
	VS10L	10	10+0.24+0.15	12.3	VS10S	10	10+0.24+0.15	12.3
	VS12L	12	12+0.26+0.15	14.3	VS12S	12	12+0.26+0.15	14.3
	VS15L	15	15+0.26+0.15	17.3	VS14S	14	14+0.26+0.15	16.3
	VS18L	18	18+0.26+0.15	20.3	VS16S	16	18+0.26+0.15	18.3
	VS22L	22	22+0.29+0.16	24.3	VS20S	20	20+0.29+0.16	22.9
	VS28L	28	28+0.29+0.16	30.3	VS25S	25	25+0.29+0.16	27.9
	VS35L	35	35.25+0.18+0	38.0	VS30S	30	30+0.29+0.16	33.0
	VS42L	42	42.25+0.2+0	45.0	VS38S	38	38.25+0.15+0	41.0

Note: If worn or deformed inner cone of the pre-install coupling causes scraps in assembly, check the dimensions every 50 ferrules based on the values of d and D in the table.