

依格流体技术（浙江）股份有限公司 EAGLE FLUID TECHNOLOGY (ZHEJIANG) CO., LTD

Product Center

BKD High-frequency Switching Ball Valve

EAGLE PRODUCT

Product categories 



BKD High-frequency Switching Ball Valve

Max. Working Pressure: 300bar
Nominal Size: 4～25mm
Working Temperature: -45℃～+200℃
Body Material: 304 Stainless steel

技术资料

联系我们

 热线电话: 0573-83696688

 Quick inquiry

 Download

BKD High-frequency Switching Ball Valve

Product description

Parameters Table

Download

BKD Stainless Steel High Pressure Ball Valve (DN4~25 mm)

Uses
Suitable for applications requiring frequent switching of the valve; 210 bar hydraulic oil test of 100,000 cycles shows no leakage (with EG automatic actuator); applicable to gases and liquids (not applicable to hydrogen, helium and oxygen); the valve has a mounting hole on the top.

Technical Features
● Stem: hardened stainless steel
● Stem gasket: high-strength PEEK
● Stem seal: high speed rotary seal with a long life

① Hardened stainless steel stem: hardness ≥HRC38, long life &corrosion-resistant;
② High speed rotary seal: reinforced PTFE seal assembly, high pressure rating &long life;
③ PEEK stem support: well lubricated &long life;
④ Ball seat support ring: enhance pressure rating and self-centering performance of ball seat seal
⑤ MoS2 coating on stem surface improves wear resistance;
⑥ Ball seat seal: imported DIN MBH material (POM, PEEK optional), high pressure rating &stable performance;
⑦ Stainless steel finish ground ball;
⑧ FPM O-ring: high temperature rating &15-year service life.

Ordering Information

BKD Ball Valve Sealing Materials

Type	Material	Uses
Ball Seat Seal	POM	Mainly used for non-corrosive oils, water and gases; temperature: -30℃~+100℃
Ball Seat Seal	PEEK	Relatively good corrosion resistance; wide temperature range: -60℃~+250℃
O-ring	NBR	Intended for oils, water, air and other non-corrosive media; temperature: -35℃~+100℃
	FPM	Good chemical adaptability; especially suitable for oils and concentrated acids; temperature: -25℃~+200℃
	EPDM	Intended for ammonia, steam, formaldehyde and ethylene glycol; mineral oil intolerant; temperature: -50℃~+130℃

Common Material Combinations of BKD Ball Valves

Combination Code	Ordering Number (example)	Body	Ball Seat Seal	Stem Seal	Applicable Conditions
4425	BKD-G3/4-20-4425	304	POM	FPM	Water, oil, air and other neutral media;; temperature: -25℃~+100℃
4465	BKD-G3/4-20-4465	304	PEEK	FPM	Applicable to high temperature media; temperature: -25℃~+200℃

Body Dimensions, Mounting Hole Dimensions and Max. Working Pressures [mm]

Nominal Size DN	Max. Working Pressure [bar]	SW	E	F	H	G	C	M	N	S	T	Mounting Hole Code
4月8日	300	9	26	32	13	M5	－	29	19	5	7	－
10	300	9	32	38	16.5	M5	36	－	－	7	9	F03
13	300	9	35	40	17.5	M5	36	－	－	7	9	F03
16	300	12	39	47	20	M5	42	－	－	7	9	F04
20	300	14	49	58	24.5	M6	50	－	－	8	11	F05
25	300	14	55	63	28	M6	50	－	－	8	11	F05

Table of Technical Data of Ball Valves (★ If ball valves with handle are required, add “-H” to the end of the ordering number) [mm]

Diagram★	Ordering Number	DN	D	L	A	B	Max. Working Pressure [bar]
G Female Thread	BKD-G1/8-04-4425	4	G1/8	69	55.5	107	300
	BKD-G1/4-06-4425	6	G1/4	69	55.5	107	300
	BKD-G3/8-08-4425	8	G3/8	69	55.5	107	300
	BKD-G3/8-10-4425	10	G3/8	73	58	107	300
	BKD-G1/2-13-4425	13	G1/2	85	59	107	300
	BKD-G3/4-20-4425	20	G3/4	96	78	160	300
	BKD-G1-25-4425	25	G1	115	79.5	160	300

Diagram★	Ordering Number	DN	D	d	L	A	B	Max. Working Pressure [bar]
Metric Thread 24° Cone DIN2353 “L” Series	BKD-06L-04-4425	4	M12*1.5	6	67	55.5	107	300
	BKD-08L-06-4425	6	M14*1.5	8	67	55.5	107	300
	BKD-10L-08-4425	8	M16*1.5	10	71	55.5	107	300
	BKD-12L-10-4425	10	M18*1.5	12	75	58	107	300
	BKD-15L-13-4425	13	M22*1.5	15	84	59	107	300
	BKD-18L-13-4425	13	M26*1.5	18	84	59	107	300
	BKD-22L-16-4425	16	M30*2	22	90	82	152	250
	BKD-28L-20-4425	20	M36*2	28	106	78	160	250
	BKD-35L-25-4425	25	M45*2	35	116	79.5	160	250

Diagram★	Ordering Number	DN	d	L	A	B	Max. Working Pressure [bar]
Compression Fitting DIN2353 “L” Series	E-BKD-06L-04-4425	4	6	83	55.5	107	300
	E-BKD-08L-06-4425	6	8	83	55.5	107	300
	E-BKD-10L-08-4425	8	10	86	55.5	107	300
	E-BKD-12L-10-4425	10	12	91	58	107	300
	E-BKD-15L-13-4425	13	15	102	59	107	300
	E-BKD-18L-13-4425	13	18	106	59	107	300
	E-BKD-22L-16-4425	16	22	112	82	152	250
	E-BKD-28L-20-4425	20	28	128	78	160	250
	E-BKD-35L-25-4425	25	35	140	79.5	160	250

Note: If ferrules without O-ring are required, change “E-” to “C-”, for example: C-BKD-18L-13-4425.

Diagram★	Ordering Number	DN	S﹡	d	L	A	B	Max. Working Pressure [bar]
Compression Fitting DIN2353 “L” Series	W-BKD-06L-04-4425	4	1.5	6	116	55.5	107	300
	W-BKD-08L-06-4425	6	1.5	8	116	55.5	107	300
	W-BKD-10L-08-4425	8	1.5	10	122	55.5	107	300
	W-BKD-12L-10-4425	10	1.5	12	126	58	107	300
	W-BKD-15L-13-4425	13	2	15	144	59	107	300
	W-BKD-18L-13-4425	13	2.5	18	148	59	107	300
	W-BKD-22L-16-4425	16	3	22	155	82	152	250
	W-BKD-28L-20-4425	20	4	28	178	78	160	250
	W-BKD-35L-25-4425	25	4	35	190	79.5	160	250

* If there is a high deviation of weld nipple wall thickness, specify when placing an order, for example: W-BKD-22L-16-4425(22*4)，where “*4” indicates the weld nipple wall thickness S is 4.

Torque Curves
The working torque of ball valves depends on pressure and ball seat sealing material. In the diagram, the working medium is oil, the seal is POM and (supposing water*1.2, air*1.4 and granular powder*1.6) actuator torque = 1.2*Torque (where: 1.2 is the safety factor).